Vanquish Products VS4-10 Phoenix Falken Edition RTR Portal Axle Rock Crawler

Write Review
Additional Information
  • Weight : 6.50
  • Model : VPS09013
  • Out of Stock
The Vanquish VS4-10 Phoenix Ready-to-Run (RTR) Portal Axle Falken Edition Rock Crawler is a true rock star within the crawler community! Decked out in the iconic Falken green and blue hues. Equipped with the sought after VFD Twin Transmission and molded F10 axles, ensure a robust foundation. Fueled by a brushed 35T VM-1 Motor and equipped with a VE-1 3S capable ESC, complete control and an extraordinary scale movement experience are at your fingertips. Incorporating cutting-edge technology and precision engineering, The Vanquish VS4-10 Falken Edition Ready to Run Rock Crawler is here to kick up some dirt and rock the trails!

The Desired VFD Twin Transmission features 6.5% OD (Over Drive) VFD gears and an integrating servo mount for the use of the optional dig function when paired with a dig servo and servo horn (both sold separately). The F10 portals boast machined ring and pinion gears, resilient chromoly universal axle shafts, and rugged 6-bolt spools, all ensuring unwavering durability. Complete with ball bearings, and precision 32P spur/pinion gears, the drivetrain guarantees seamless and dependable performance.

Facilitating the seamless connection between the VFD Spec and the F10 Axles, the Vanquish VS4-10 incorporates the state-of-the-art ISD10 driveshafts. These driveshafts boast artfully crafted CV-style joints at both ends, meticulously linked by molded splined shafts to ensure a frictionless, noise-free, and remarkably efficient performance. The incorporation of sizable 8mm bore S8E shocks adds to the suspension prowess, boasting dual X-Ring cartridges and precision-engineered threaded caps, complete with a meticulously sealed upper bleeder screw. Fine-tuning the S8E preload is effortlessly achieved through the utilization of threaded shock bodies and collars, exemplifying the system's user-friendly design.

RTR Features:
  • VT-1 Digital 4 Channel Transmitter: The VT-1 provides industry leading features and tuning capabilities in an RTR. With fifteen model memory, multi-channel endpoint and rate adjustment, digital screen, and multi-position switches for the 3rd and 4th channel this transmitter is packed with features and functions to suit your needs.
  • VE-1 ESC: This 3S LiPo capable ESC uses a built in BEC to power the steering servo, plus any optional extras you add. Factory tuned for your VS4-10 Phoenix RTR, the VE-1 ESC purpose built to deliver outstanding brushed performance.
  • VM-1 35T Brushed Motor: Made with a closed endbell design, the VM-1 motor is specifically tuned for the VS4-10 Phoenix RTR to provide trail torque with plenty of speed to conquer the roughest terrain with confidence.
  • VS-1 Metal Gear Servo: For steering, the VS4-10 Phoenix is equipped with the Vanquish VS-1 servo and boasts 200oz-in of torque. Ready for all elements the VS-1 Servo is water resistant and durable with its metal gears and 25T output spline for industry standard servo horns.
  • Officially Licensed Falken Wildpeak 1.9 Tires: Vanquish engineers spent more than a year developing their proprietary sticky "red" compound and paired with the Wildpeak tread the VS4-10 RTR is comp ready. A tire upgrade is unnecessary.



    VFD Twin Transmission - Selectable Overdrive and Dig (Patent Pending)
    F10 Portal Axle Housings
    Offset Pumpkin Front Portal Axle
    Centered Pumpkin Rear Portal Axle
    Universal-style front axle shafts
    Double Shear Shock Mounts
    ISD10 Driveshafts

    VFD Twin Transmission:
    On the fly Selectable Overdrive
    Standard Overdrive 6.5%
    Selectable High Overdrive 45%
    Mechanical Overdrive Lockout to set Overdrive in Either 6.5% or 45% Positions
    Use Overdrive neutral position for 2WD (disengage front output)
    Dig with 3 Positions
    Mechanical Dig Lockout
    Compatible with 540 brushed and brushless motors (Fits most 540 brushed and brushless motors)
    Slipper Clutch
    Sintered Internal Gears
    Hardened Chromoly Shafts
    Molded VFD Twin Extended Skid Plate for Motor Protection
    Molded Battery and Electronic trays
    Full ball bearing transmission
    Sintered Shift arms with Brass pivot shift bushing
    Chromoly slide dogs for Overdrive and Dig shifting
    Scale Molded Transmission Housing
    Molded Bearing Plates
    Molded 6mm motor plate
    Molded Spur Gear Cover
    32P 52T Spur and 15T Steel Pinion
    Silicone dust shields for shift arms (Transmission dust shield is not 100% element proof. Use access cover to regularly check the transmission for debris and add grease as needed.)

    F10 Portal Axles:
    Molded Axle housings
    Universal Style Axle Shafts
    49 Degrees of Steering
    High Caster reinforced C-Hub
    High-Pinion Hypoid Machined Axle Gears (30/8)
    6-Bolt Ring Gear and Spool
    6mm Output shafts with M5 wheel nut
    One-Piece Molded Bearing Retainers
    Adjustable Lower Shock Mounting Position
    Scale removable third member
    Machined aluminum red anodized rear fill cap with molded install tool

    Heavy Duty High Clearance Steel C-Channel Frame Rails
    Molded Front Inner Fenders with integrated LED mounts
    Phoenix Molded Rock sliders
    Phoenix High Clearance Bumpers
    Integrated battery tray and electronic mounting positions
    VFD Twin Overdrive and Dig servo mounts
    Stainless Steel links
    Molded inner fenders with front body hinge and scale radiator mount

    S8E Scale 90mm Shocks
    The Incision S8E Aluminum Scale Shocks feature a larger 8mm bore for increased dampening & longer seal life
    Dual molded X-Ring lower shock cartridge provides more sealing surfaces than standard O-rings
    Threaded shock bodies allow a wide spring preload range
    Scale shock cap with steel pivot ball and bleeder screw
    Offset lower shock pivot balls allow for greater flexibility for tuning shock angles
    Polished Shock shafts

    Phoenix Body:
    Falken Tire Livery
    VRD1 Rear Cage
    3-Piece Body Design
    Headlight and Tail Light buckets
    Molded Grille
    Hinged Design
    Hidden body clips with quick release front pivot pin

    Wheels and Tires:
    1.9 Falken Wildpeak M/T RED Compound Tires
    1.9 Incision KMC KM233 Hex Beadlock Wheels

    Scale: 1/10
    Width: 9.84in (249mm)
    Front/Rear Axle Width (Pin to Pin): 7.17in (182mm)
    Height: 9.84in (249mm)
    Wheelbase: 12.32in (313mm)
    Pinion Gear: 15T
    Spur Gear: 52T
    Front Ratio: Standard(6.5%OD): 53.7:1 / High (46% OD): 35.8:1
    Rear Ratio: 57.3:1
    RTR Weight: 6.9lbs (2.7kg)

    (1) Vanquish VS4-10 Phoenix Portal Axle RTR Rock Crawler with:
    (1) VE-1 Brushed ESC
    (1) VM-1 35T Brushed Motor
    (1) VS-1 Steering Servo
    (1) VT-1 Digital 4-Channel Transmitter
    Product Manual

    Needed to Complete:
    (1) 2-3S LiPo Battery or (1) 6-Cell NiMH Battery with XT60 Connector
    Compatible Battery Charger
    Additional Electronics for VFD Twin Functionality:
    (2) Standard size servos for Dig and Selectable Overdrive (Standard or Low Profile)
    (2) 24mm servo horns
  • There are currently no product reviews.

    Write Review

    There are currently no videos

    We Accept

    Shopping Cart[more]

    0 items