Canopy designed to be printed with TPU for the Open Racer race quad frame. - Download Here




This is an open-source frame. Comes with CF parts, hardware and our version of 3D printed Canopy.

NOTE:
- We are not the designer and are not responsible if the frame is not as you hopped.

OpenRacer is an open source frame designed by dedicated racers in Houston, Texas, who were inspired by the CampfireQuads CF1 frame. It is light, tight, an very agile. If you want high speed and extreme control, then the OpenRacer is just for you.

Frame Specs:
Prop size: 5"
FC mounting: 20x20(M3), 25.5x25.5(M2) and 30.5x30.5(M3)
Camera mounting: 3D printed
Motor mounting: 16x16mm

Included parts:
- 1x 2.5mm base plate
- 1x 2.5mm top plate
- 2x 4.0mm brace
- 4x 5.0mm arms- Racer Arms

Hardware:
5x 10mm M3 standoff
5x M3 Nylon nut
5x 6mm M3 BH screw
5x 8mm M3 BH screw
9x 12mm M3 BH screw
5x 20mm M3 BH screw
5x 12mm M3 CS screw
5x 16mm M3 CS screw
5x 30mm M3 CS screw
17x 8mm M3 Cap screw
9x 12mm M3 Cap screw

There are currently no product reviews.

Write Review

There are currently no videos