Vanquish Products VS4-10 Phoenix Straight Axle Rock Crawler Kit w/FREE VPS10210!

Write Review
Additional Information
  • Weight : 4.00
  • Model : VPS09008
$415.38US $415.00US
Qty :
The Vanquish VS4-10 Phoenix Straight Axle Rock Crawler Kit is designed and built with the Vanquish Products VFD Twin transmission (patent pending) and molded F10 axles. This combination provides performance advantages never before offered in a scale kit of its kind. The VFD Twin incorporates Selectable Overdrive Shifting and a 3-position dig unit into one compact package. The molded F10 Straight Axles utilize a high clearance design which minimizes the size of the pumpkin and maximizes strength around the C-hub and knuckle. Connecting the VFD Twin to the F10 Straight Axles are the ISD10 driveshafts. The ISD10 Driveshafts have machined CV-style joints at each end with molded splined shafts between them for smooth and efficient performance.

The VFD Twin Transmission (Patent Pending) kit is an evolution of the original VFD. Taking the same balance of performance, scale appearance, strength, and adding industry first features. The VFD Twin comes equipped with selectable overdrive and rear dig. The twin shifting transfer case utilizes replaceable bearing plates, a brass pivot for the shift arms, and chromoly shift slides. Borrowing from the proven Hurtz dig, the VFD twin shifting is smooth and reliable. On the fly overdrive shifting from 6.5% to 33% makes an immediate change to the driving characteristics and tuning options. Plus, if you don't want to invest in additional servos for the dig or overdrive, both systems feature a mechanical lockout system so you aren't required to run these features unless you want to!

The F10 Plastic Molded Straight axles benefit from Vanquish Product’s years of design experience in making the industry’s best aluminum axles. The molded F10 Straight axles feature an ultra-rigid design with an integrated truss that ties both ends of the axle together and oversized C's with an integrated panhard mount.

Vanquish Products VS4-10 Chassis is made to provide you with a balance of scale looks and unhindered performance. The steel C-channel design provides scale detail, molded front and rear cross members fill the chassis rails in the highest stress locations for ultimate strength and provide features like dual servo mounts, winch line routing, and a fuel cell. The molded rock sliders come with a replaceable tapered outer portion that perfectly fits the Phoenix body. The VS4-10 chassis is developed to work with the VFD Twin transmission to keep the overdrive and dig servo low on the platform. The panhard mount on the chassis is made from machined aluminum to withstand the impacts of severe trail conditions. Molded shock towers capture the top of the 90mm Incision S8E Shocks in double shear for maximum support. Narrow molded front and rear bumpers maximize clearances while improving approach and departure angles.

The VS4-10 features Incision 90mm S8E shocks with larger 8mm bore aluminum threaded bodies, dual X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension provides scale looks by keeping the servo out of sight, while still providing room for full suspension travel. The suspension pivots on a full set of stainless steel links to keep the weight down low with a smooth transition from the link to the rod ends.

NOTE: Finished kit shown in the photos is for illustrative purposes only. See the needed to complete list below for a list of items required to complete the model.

Features:

Drivetrain

VFD Twin Transmission - Selectable Overdrive and Dig (Patent Pending)
F10 Straight Axle Housings
Offset Pumpkin Front Straight Axle
Centered Pumpkin Rear Straight Axle
Universal-style front axle shafts
Double Shear Shock Mounts
ISD10 Driveshafts

VFD Twin Transmission
On the fly Selectable Overdrive
Standard Overdrive 6.5%
Selectable High Overdrive 33%
Mechanical Overdrive Lockout to set Overdrive in Either 6% or 33% Positions
Use Overdrive neutral position for 2WD (disengage front output)
Dig with 3 Positions
Mechanical Dig Lockout
Compatible with 540 brushed and brushless motors (Fits most 540 brushed and brushless motors)
Slipper Clutch
Sintered Internal Gears
Hardened Chromoly Shafts
Molded VFD Twin Extended Skid Plate for Motor Protection
Molded Battery and Electronic trays
Full ball bearing transmission
Sintered Shift arms with Brass pivot shift bushing
Chromoly slide dogs for Overdrive and Dig shifting
Scale Molded Transmission Housing
Molded Bearing Plates
Molded 6mm motor plate
Molded Spur Gear Cover
32P 56T Spur and 13T Steel Pinion
Silicone dust shields for shift arms (Transmission dust shield is not 100% element proof. Use access cover to regularly check the transmission for debris and add grease as needed.)

F10 Straight Axles
Molded Axle housings
Universal Style Axle Shafts
49 Degrees of Steering
High Caster reinforced C-Hub
High-Pinion Hypoid Machined Axle Gears (30/8)
6-Bolt Ring Gear and Spool
5mm Output shafts with M4 wheel nut
One-Piece Molded Bearing Retainers
Adjustable Lower Shock Mounting Position
Scale removable third member
Machined aluminum red anodized rear fill cap with molded install tool

Chassis
Heavy Duty High Clearance Steel C-Channel Frame Rails
Molded Front Inner Fenders with integrated LED mounts
Phoenix Molded Rock sliders
Phoenix High Clearance Bumpers
Integrated battery tray and electronic mounting positions
VFD Twin Overdrive and Dig servo mounts
Stainless Steel links
Molded inner fenders with front body hinge and scale radiator mount

Suspension
Stainless Steel Links
Stainless Steel Pivot Balls

S8E Scale 90mm Shocks
The Incision S8E Aluminum Scale Shocks feature a larger 8mm bore for increased dampening & longer seal life
Dual molded X-Ring lower shock cartridge provides more sealing surfaces than standard O-rings
Threaded shock bodies allow a wide spring preload range
Scale shock cap with steel pivot ball and bleeder screw
Offset lower shock pivot balls allow for greater flexibility for tuning shock angles
Polished Shock shafts

Phoenix Body
VRD1 Rear Cage
3-Piece Body Design
Removable Bed Sides
Headlight and Tail Light buckets
Molded Grill
Hinged Design
Hidden body clips with quick release front pivot pin
Full interior
Molded details parts (Wipers, Gear shifter, Steering wheel)

Wheels and Tires
1.9 VXT Tires
1.9 Incision KMC KM233 Hex Beadlock Wheels

Specifications:
Overall Width: 242mm (9.53")
Overall height: 242mm (9.53")
Wheelbase: 313mm (12.3")
Overall Front Ratio (Standard 6.5% OD): 47.6:1
Overall Front Ratio (High 33% OD): 31.8:1
Over Rear Ratio: 50.8:1
Average RTR weight: 6.5lbs (2.9kg) (can vary with electronics)
Front axle width pin to pin: 182mm (7.17")
Rear axle width pin to pin: 182mm (7.17")

Needed to Complete:
ESC
540 Motor
Steering Servo (Vanquish 20mm servo horn recommended)
Battery
Transmitter and Receiver
Polycarbonate Paint for Body
Tools for Assembly

Additional Electronics for VFD Twin Functionality:
(2) Standard size servos for Dig and Selectable Overdrive (Standard or Low Profile)
(2) 24mm servo horns
4 Channel Transmitter and Receiver

There are currently no product reviews.

Write Review

We Accept

Shopping Cart[more]

0 items