Happymodel Mobula6 HD 1S Brushless Whoop BNF DSMX

Write Review
Additional Information
  • Weight : 0.10
  • Model : MOBUHD6DS
$124.99US
Qty :
Features:
  • AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
  • Extreme light 1S 65mm Brushless HD whoop only 27g
  • Come with Runcam Split3-lite 1080P HD DVR
  • Smooth and agile
  • Compatible for 1S Lipo/LIHV
  • Camera Angle adjustable

    Specifications:
  • Brand Name: Happymodel
  • Item Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF version
  • Wheelbase: 65mm
  • Size: 80mm*80mm*40mm
  • Weight: 27g
  • External DSM2/DSMX version(Compatible with Spektrum DSM2/X transmitters)

    Package includes:
  • Mobula6 1S 65mm whoop Drone Frame x1
  • External receiver?DSM2/DSMX compatible satellite receiver
  • EX0802 KV19000 brushless motor 4
  • Gemfan 1219-3 Propellers(4cw+4ccw) x1
  • Runcam Split3-lite 1080P HD Camera +DVR x1
  • 5.8G 25mw 40ch vtx (Flight controller built-in) x1
  • 1S 250mah 30C LiHV Battery x4
  • 1S Lipo/LIHV USB Charger x1
  • Propeller disassemble tool x1

    Spare parts specifications:
    Motor
  • Mode: EX0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:?1mm
  • Motor Dimension(Dia.*Len):?10.5mm*14.9mm
  • Weight(g):1.7g
  • No.of Cells(Lipo):1S only

    Propellers
  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

    Flight controller
  • (External DSM2/DSMX RX version) CRAZYBEE F4 Lite Firmware target:CrazybeeF4DX
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in 5V 1A BEC
  • Built-in voltage detection

    Onboard 4in1 ESC
  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

    External DSMX version
  • Resolution: 1024/2048
  • Operating voltage: 3.3V
  • Working current: 60MA
  • Size: 15mm*10mm*5mm
  • Antenna length: 30mm
  • Protocol: DSM2/DSMX

    Onboard 5.8g VTX
  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race bandSmartaudio ready

    Runcam Split3-Lite
  • Model: RunCam Split3-Lite
  • Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
  • Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
  • Video File Format: MOV
  • Image Resolution:2 MP
  • TV Mode: NTSC (720*480)/PAL (720*576) Switchable
  • Interface: JST 1.25mm / UART and SH 1.0mm
  • Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
  • Hole Distance of Installation: 25.5*25.5mm
  • PCB Size: 29*29mm
  • Lens Module Size: 14*14mm
  • Lens Specs: M9
  • Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
  • Working Current: 450mA @5V

    Lipo Battery
  • Capacity:250mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Size: 55mmx12mmx7mm
  • Weight: 6.5gConnector: PH2.0
  • There are currently no product reviews.

    Write Review

    We Accept

    Shopping Cart[more]

    0 items