BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 12A(BLHeli_S) - Pins PreSoldered

Write Review
Additional Information
  • Weight : 0.02
  • Model : 00313596
$58.04CAD
Qty :
The new layout 12A 2-4S F4 AIO FC(BLHeli_S) is customized for Toothpick Drone. With the real holes, side-mount USB and all solder pads of the edge of FC, greatly reducing installation time and improving ease of self-assembly. The weight saving of the all in one board makes this ideal for tight builds - using the included Anti-vibration rubber dampers for mini stack height.



BULLET POINT
  • New layout with whoop mounting pattern, designed real holes instead of notches, customized for Toothpick Drone
  • Adopt USB side-mount, easy to plug in
  • All of solder pads are at the edge of FC, which is a convenience to solder
  • Double-sided motor solder pad. Pins pad and wires pad are both built-in for motors connection
  • Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience

    Recommended Battery and Motor Combo
  • 2S - 1103 11000KV / 0802 12000KV / 08028 12000KV
  • 3S - 1103 8000KV / 1105 6000KV
  • 4S - 1105 5000KV / 1106 5000KV

    Comparison of F4 12A AIO FC and Toothpick 12A AIO FC



    Double-sided Motor Solder Pad
    Support connect with motors via connectors or solder directly



    Whoop Mounting Pattern and Real Holes of Mounting Holes
    Whoop size with 26.5*26.5mm mounting holes



    SPECIFICATIONS OF FC
    CPU: STM32F411CEU6 (100MHZ)
    Six-Axis: MPU6000 (SPI connection)
    Size: 32.5*32.5mm (26.5mm mounting holes)
    Firmware version: Betaflight MATEKF411 (MK41)
    OSD: Build-in BetaFlight OSD (OSD chip: AT7456E)
    Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky
    Receiver/ TBS Crossfire Receiver/DSMX Receiver.
    Support programmable LED like WS2812 etc
    Built-in current sensor
    Weight: 6.2g(Without Pins), 6.5g(Pins Pre-solder)

    SPECIFICATIONS OF ESC
    Support BLheli/BLHELI_S suite Pass-through ready
    Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
    Input voltage: 2S-4S Lipo
    Continue current: 12A
    Peak current: 15A
    Firmware: BLHELI_S
    Processor: SILABS EFM8BB21F16G-C
    Motor Connectors: 1.25mm header pins connector
    Factory firmware: G-H-30-16.7

    DIAGRAM FOR Toothpick F4 2-4S AIO FC



    PACKAGE
    1 * Toothpick F4 2-4S AIO brushless flight controller
    1 * Cable Pigtail (XT30)
    4 * M2x10mm screws
    4 * M2 nuts
    4 * Anti-vibration rubber dampers



  • There are currently no product reviews.

    Write Review

    There are currently no videos

    also purchased

    We Accept

    Shopping Cart[more]

    0 items

    Currencies

    What's New?[more]