The E-flite® Ultra Stick 1.1m is an updated, upgraded, and more refined version of the iconic Mini Ultra Stick that's a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots!

- Inspired by the iconic Mini Ultra Stick with modern-day technologies, features, and performance for “mild to wild” capabilities
- Specially tuned brushless motor compatible with 3S and 4S batteries without the need for modifications
- 45-amp Spektrum™ Avian™ Smart Lite ESC provides real-time battery voltage, current, and other data via compatible receivers and transmitters
- Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® technology
- Fast and easy bolt-together assembly – no glue, tape, or special tools required



In The Box
(1) E-flite® Ultra Stick 1.1m
(4) Spektrum™ Metal-Geared Servos (installed)
(1) Spektrum Brushless Outrunner Motor (installed)
(1) Spektrum Avian™ 45-Amp Brushless Smart Lite ESC (installed)
(1) Spektrum AR631 6-Channel Receiver with AS3X and SAFE Select (installed)
(1) Product Manual

Needed to Complete
(1) Full-range 4–7+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter
(1) 3S 11.1V or 4S 14.8V 2200–3200mAh LiPo with EC3™ or IC3™ Connector
(1) Compatible LiPo Charger

Introduction
The Mini Ultra Stick was E-flite's first-ever "wood" PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) model that became an instant best-seller when it was released in 2005. It was available for more than a decade and is still iconic to this day because it went together as easily and in as little time as foam PNP models, yet offered the advantages of lightweight, stiff, and strong wood construction that delivered flight performance unlike similar class fully-molded EPS and EPO foam models. The Ultra Stick 1.1m is an updated and upgraded version that is slightly larger to offer even better flight performance with extremely popular and common 3S or 4S 2200–3200mAh batteries. It's available in an ARF version that bolts together and is ready for installation of your preferred power system and electronics, or in a BNF Basic version that's equipped with four factory-installed servos, a Spektrum Avian Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies. Both versions are ready to accept two additional wing servos for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel pants to look even more like the larger Hangar 9 Ultra Stick models the design is based on. That design offers excellent low-speed characteristics for easier landings, incredible high-speed handling, and impressive aerobatic capabilities that intermediate to experienced pilots will appreciate and enjoy!

Features
Inspired by the iconic Mini Ultra Stick with modern-day technologies, features, and performance for "mild to wild" capabilities
A great first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots
Specially tuned brushless motor compatible with 3S and 4S batteries without the need for modifications
Popular and affordable 2200–3200mAh batteries deliver a wide range of performance and flight times
45-amp Spektrum™ Avian™ Smart Lite ESC provides real-time battery voltage, current, and other data via compatible receivers and transmitters
Optional-use motor reversing for special ground handling and other capabilities
Compatible with the Spektrum™ DXS transmitter included with many RTF trainer models
Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® technology
Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
The unmatched stability and locked-in feel of exclusive AS3X® technology
Four durable, factory-installed metal-geared servos and linkages
Larger control surfaces for added control and sport to mild 3D aerobatic capabilities
The option to add two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons
One-piece wing with a fully-symmetrical airfoil that's quick and easy to install/remove with a single thumbscrew
Steerable tailwheel plus large tires for the ability to take off from/land on a variety of surfaces, including grass
Strong and stiff – yet lightweight and long-lasting – built-up wood construction
Fast and easy bolt-together assembly – no glue, tape, or special tools required

Overview
The E-flite Ultra Stick 1.1m is based on the design of larger Hangar 9 Ultra Stick models and was inspired by the iconic Mini Ultra Stick. In 2005 the Mini Ultra Stick became an all-time top-seller as E-flite's first-ever "wood" PNP and ARF model that bolted together so it could be assembled as easily and in as little time as foam PNP models. It also offered the benefits that strong, stiff and lightweight, built-up wood construction offered – which delivered flight performance unlike molded foam models. The Ultra Stick 1.1m is an updated, upgraded, and more refined version of the Mini Ultra Stick. The balsa and lite-ply airframe is still lightweight yet features stiffer tail surfaces – that install quickly and easily with just two locknuts – and a stronger mounting area for the main gear installed with four bolts. The one-piece wing is easy to install and remove thanks to the single thumbscrew, plus it's set up to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups.

The BNF (Bind-N-Fly) Basic version is equipped with four factory-installed metal-geared servos, a 3S and 4S compatible Spektrum motor, and an exclusive Avian 45-amp Smart Lite ESC that can provide a variety of real-time power system telemetry data with Smart and non-Smart batteries via compatible Spektrum AirWare™ equipped transmitters. It's also equipped with an AR631 receiver to provide fly-by range and real-time telemetry data, including battery voltage, current, ESC temps, and more — plus motor reversing for special ground handling and other capabilities — along with the benefits of AS3X® and optional-use SAFE® Select technologies. Or, the ARF (Almost-Ready-To-Fly) version is ready for installation of your preferred electronics and power system! And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the same great low-speed flight characteristics that make for easier landings, along with excellent high-speed handling and outstanding basic to mild 3D aerobatic capabilities. You can even install the optional wheel pants (sold separately) to make it look more like larger Ultra Stick models! This makes it a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots.





Bind-N-Fly Completion Level Advantage
Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos, and a Spektrum 2.4GHz receiver installed, so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly!



Smart Technology
The Ultra Stick 1.1m is equipped with an exclusive Spektrum™ Avian™ Smart Lite ESC that can provide a variety of real-time power system-related telemetry data, including motor RPM, current, battery voltage, and more – with Smart and non-Smart batteries – via compatible receivers (including the AR631) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX14, iX20, and others) while you fly.



Exclusive Technologies
This Ultra Stick is equipped with exclusive Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch to make it easier to take off, fly and land!



Flexible Power
The factory-installed brushless outrunner motor is 3S and 4S compatible, offering a wide range of "mild to wild" performance – from sport flying and basic aerobatics with 3S batteries to hovering and unlimited vertical performance with 4S batteries! The convenient top-mounted and magnetically secured hatch cover makes installing and removing common and popular 2200–3200mAh batteries easy.



Wood Airframe
The balsa and lite-ply airframe is lightweight yet stiff and strong, offering a flying experience you can't get with molded foam models! Best of all, it arrives mostly factory-assembled, and the BNF Basic version also includes durable, factory-installed metal-geared servos and linkages. And in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement/spare parts is readily available.



Uniquely Capable
The iconic Mini Ultra Stick inspired the Ultra Stick 1.1m. And because it's based on the design of larger Hangar 9 Ultra Stick models, it offers the same excellent low-speed flight characteristics that make for easier landings, along with excellent high-speed handling and amazing basic to mild 3D aerobatic capabilities. This makes it a perfect first-ever "wood," everyday sport flying and aerobatic capable model for a wide range of pilots. Plus, it's set up to accept two additional servos so you can split the ailerons for "crow" and/or flaps plus full-span aileron/flaperon/spoileron setups!



Easy Assembly
The BNF Basic version Ultra Stick 1.1m arrives mostly factory-assembled with the power system, servos, and receiver installed. The ARF version is also mostly factory-assembled, so all you need to do is finish some quick and easy final bolt-together assembly – without glue, tape, or special tools – and you'll be ready to fly in less time compared to almost all other wood models!

There are currently no product reviews.

Write Review