Spedix ES30A High Voltage 3-6S ESC with BLHeli_S Program

Write Review
Additional Information
  • Weight : 0.02
  • Model : SPX-71028
  • Out of Stock
$10.49US
This is a new version Spedix BLHeli_S speed controller supporting 3-6S LiPo batteries.

Specifications:
  • Continuous Current: 30A
  • Burst Current: 40A
  • Input Voltage: 3S-6S LiPO
  • Weight: 5.5g with wires and heat shrink wrap
  • Dimensions: 25x13mm

    Please click here to check discussions on RC Groups about BLHeli_S program.

    SSKaug stated the features of the new BLHeli_S program in the above thread as:

    "BLHeli_S is an improved version of the base BLHeli code.

    BLHeli_S delivers a throttle response that is Smooth as Silk, and the main factor contributing to this, is that it uses hardware to generate motor PWM. Two MCUs support this for BLHeli_S, namely the BusyBee1 at 24MHz (EFM8BB10F8) and the BusyBee2 at 48MHz (EFM8BB21F16).

    BLHeli_S will have the same good Sync holding properties as base BLHeli. Maybe even better.

    BLHeli_S generally does Startup better than base BLHeli.

    BLHeli_S does damped light. Only.

    BLHeli_S has motor PWM that is Synchronous to the MCU master clock, as it is generated by hardware. This makes the motor Silent.

    BLHeli_S has very Small throttle Steps. The resolution varies between hardware configurations (MCU clock speed and driver type), and is between a nominal 512 steps and 2048 steps.

    BLHeli_S supports very high motor Speeds. A BB1 MCU will support 350k erpm, and the limit of the BB2 is not yet known, so the code is set to limit at 500k erpm.

    BLHeli_S supports regular 1-2ms input signal, as well as Oneshot125, Oneshot42 and Multishot. Autodetected when the ESC sees an input signal.

    Last and by no means least, is Simplicity. If you have a regular setup, just install and go fly (calibrate if your throttle range does not match BLHeli_S default). Or if you need to configure or update, just do so with the Simplicity offered by connecting to your ESCs through the FlightController, using BLHeliSuite and a USB cable."






  • There are currently no product reviews.

    Write Review

    There are currently no videos

    also purchased

    We Accept

    Shopping Cart[more]

    0 items