SN Hobbies - Blade 450 3D RTF RC Helicopter

Blade 450 3D RTF RC Helicopter
[BLH1600]
[HEH.LFEE]

$469.99US

Blade 450 3D RTF RC Helicopter - SN Hobbies

Click to enlarge

Share |

Key Features

The DS76-series servos are specially designed to deliver maximum power and precision for extreme 3D heli flight

The G210HL gyro uses the latest in MEMS technology to provide amazing holding power during the most aggressive 3D maneuvers

The robust 35A speed controller is engineered to efficiently channel the high current flow of most any high-C 3S Li-Po battery

The compact 4.0 gram AR6115E receiver provides the superior response of Spektrum DSM® control as well as the benefit of

ServoSync which dramatically enhances the precision of any CCPM heli

The rotor head mechanics have been optimized to provide the most aggressive 3D control response possible

Overview
The Blade 450 3D RTF blasts ready-to-fly 3D heli performance to new levels of precision and power. It comes completely assembled and equipped for aggressive 3D aerobatics with state-of-the-art electronics and mechanics you would expect to find in more expensive kits that take hours to build. It’s even been flight tested and had the rotors balanced at the factory so you don’t have to do any setup. Simply charge its 3S 2200mAh 30C Li-Po battery and fly.

Specs

Type: Collective Pitch Electric 3D Heli

Main Rotor Diameter: 28.4 in (720mm)

Tail Rotor Diameter: 5.6 in (142mm)

Gross Weight: 26.9 oz (760g)

Length: 25.8 in (655mm)

Motor Size: 420H brushless outrunner, 3800Kv (installed)

Kit/ARF/RTF: RTF

Minimum Age Recommendation: 14 years

Experience Level: Advanced

Recommended Environment: Outdoor

Assembly Time: Less than 1 Hour

Is Assembly Required: No

Needed to Complete
Nothing! Everything you need is included in the box.

Tech Notes
The Blade 450 3D uses a new design on the main rotor blades (BLH1615). The blades used in the Blade 400 3D look similar but are not the same (EFLH1415A). Do NOT use EFLH1415A on the new Blade 450 3D. Although these blades will work fine on the Blade 400 3D, the Blade 450 3D is a more powerful helicopter and using EFLH1415A will create an unsafe condition. BLH1615 is safe to use on BOTH the Blade 450 3D and Blade 400 3D.

To check if your blades are the new BLH1615 design, simply look at the mounting hole. If there is a brass insert, the blades are BLH1615. If there is not a brass insert present, the blades are EFLH1415A and should not be used on the Blade 450 3D in any circumstance.

Customers who bought this product also purchased