SNHE - SNHE
  Home » Catalog » -RC Multi-Rotor » FPV Racing Bind-N-Fly / Kits » -Sub 2 Inch / Tiny Whoop » 00313370F
Contact UsMy AccountCart ContentsCheckout   
- SNHE Categories - SNHE
- SNHE
- SNHE
- SNHE Quick Find - SNHE
- SNHE
 
Use keywords to find the product you are looking for.
Advanced Search
- SNHE
- SNHE Information - SNHE
- SNHE
Privacy Notice
Conditions of Use
Contact Us
- SNHE
- SNHE What's New? more - SNHE- SNHE
- SNHE
ECX 1/28 Micro Ruckus 2WD Monster Truck RTR, Blue - SNHE
ECX 1/28 Micro Ruckus 2WD Monster Truck RTR, Blue
$54.99US
- SNHE


BetaFPV Beta75X 2S Whoop Quadcopter - BNF FRSKY
[00313370F]
[IU.YEBL]
[YA.UHA.BH.BLY]
$138.99US
- SNHE




Share |



SPECIFICATION

  • Weight: 41g (without battery)
  • Motors: 1103 11000KV with connector
  • Props: 40mm 4-blades props, 1.5mm shaft hole
  • Camera tilt angle: 35 degree
  • Recommend battery: 300mAh 2S battery
  • Receiver Option: Frsky XM+
  • Battery: 300mah 1S Battery (x2)

    Frsky Receiver Firmware Explanation
    BETA75X Frsky receiver is now pre-flashed in EU-LBT firmware or FCC firmware. So you can choose the 2S whoop based on the firmware of your radio controller.
    If you are not sure about what firmware you have on your radio controller. Please check out here on our support page.--27th Septmber 2018

    BETA75X Frsky receivers were all pre-flashed in FCC firmware before 27th September.
    Thus,if your radio controller uses EU-LBT firmware, you have to flash the firmware of the Frsky receiver to EU-LBT firmware. Otherwise, you can't bind successfully. For EU-LBT firmware users that has bought Beta65X with FCC firmware for Frsky receiver, you can checkout here to find out how to flash Frsky receiver to EU-LBT firmware.

    Cli Dump & Methods to Connect the Receiver to the 2S FC & Binding Procedures
    Note: The DSMX receiver used on the 65X is different from the one we used before. The binding procedure is also different. Check out the details on the support page below.
    Find out details on our support page.

    This is a new era for Whoop drones. 2S Whoop drone has the power to fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere. Beta75X and Beta65X. X is for "eXtreme".

    A detailed review of the Beta75X drone by Nate Payne on YT.



    See how fast the 2S whoop drone is. Video by Daniel Sugano



    Another overview and flight video by Brenden Guffin.



    For more video about these 2S Whoop drone, please check here:

    More Overview Videos

    Have any questions about 2S Whoop drone, please join our group on Facebook:
    2S POWER-WHOOP GROUP

    Join the online discussion about 2S Whoop drones at RCGroups.com:
    Beta65X Beta75X

    The little brother Beta65X is available too. Get a Beta65X here



    BULLET POINT
  • Beta75X start a new era of 2S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.
  • With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing professor.
  • Durable and light enough frame is customed for the Beta75X. A total weight of 41g give pilots a good balance of weight and nice punch on 2S battery.
  • Whole drone no soldering or tinkering necessary. Customed lightest 1103 11000KV motors with cable connectors. Just plug and play.
  • 300mAh 2S high rate battery is recommend in default. But pilot could also use their whoop batteries with a replaced power cable. Optional and affordable.




    FC SPECIFICATIONS

    Find more details about this 2S F4 FC board in another page.
  • CPU: STM32F405
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Smart Audio port is available for radio control VTX

    ESC SPECIFICATIONS
  • Support BLheli/BLHELI_S suite Pass-through ready
  • Dshot600 in default
  • Input voltage: 2S lipo
  • Cotinue current: 6A
  • Peak current: 10A
  • Firmware: BLHELI_S
  • Processor: SILABS EFM8BB21F16G

    Z02 AIO Camera VTX

    Find more details about this AIO Z02 camera VTX in another page. On the Beta65X, it is the customed version with VTX board and camera board split.
  • Output power: 0mW, 25mW and 200mW (Adjustable)
  • Smart Audio function is included for radio control
  • Antenna: Dipole ANT
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
  • TV System: NTSC
  • Field of view: 100-120 degrees with 1/4 lens

    PROPS OUT

    The Beta75X drone also comes with "props out" in default. Why we need "props out" direction?

    Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.




    Know more about "Props Out".

    POWER CABLE

    There are 2 choices for the Beta75X battery. For the best performance, we recommend a 2S 300mAh battery with XT30 connector. If you already have many 1S whoop style batteries and want to use them on the Beta75X drone, then we also provide a PH 2.0 option for you. The two 300mAh Lipo HV 1S batteries can be inserted into the slot with the help of an adapter, as seen below.




    CUSTOMED Z02

    The AIO camera VTX on the Beta75X is a customed version of Z02. The VTX board and camera board are split and 35 degree camera mount for more fast flying. At the same time, it have all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.




    How to change the frequncy or output power via remote control, please check the manual Smart Audio. Download the STL file for the camera mount.

    FAQ

    1. About the LED at the rear for Beta65X

    For the moment, the FC board doesn't support programable LED like WS2812 etc. The LED holder is designed on the frame nowadays. So we will update the FC board on the next version and release the suitable LED board.

    ,b>Note: there is NO rear LED holder for Beta65X in default.

    2. I am interested in connecting an HD camera and DVR, but I don't want to overload the circuit of 5V.

    The 5V regulator on the FC board could handle 2A of load. So you could use it for HD camera or DVR board. More details, please check the FC board page.

    3. Does this drone have current sensor?

    This drone does NOT have a real current sensor. We use the virtual current meter in Betaflight. When properly calibrated, it can be accurate enough to be useful. Here is the pre-calibrated value out of the box.

    set current_meter = VIRTUAL
    set ibatv_scale = 90
    set ibatv_offset = 29

    4. How to connect the receiver to the 2S brushless FC?

    Please don't forget to plug the battery when you try to connect the connector to the 2S brushless FC. Find out more details in our support page.

    5. Cli Dump for different versions of the 2S Whoop are provided in our support page.

    PACKAGE

    1 * 1 * Beta75X BNF 2S Whoop Quadcopter
    1 * Spare 40mm 4-blades props (2CW+2CCW)
    2 * 300mAh 1S Lipo HV batteries (Not for PNP version)
    1 * Spare Canopy

  • - SNHE
    - SNHE
    - SNHE Reviews - SNHE - SNHE
    - SNHE
    - SNHE Customers who bought this product also purchased - SNHE
    FRSKY 2.4GHZ ACCST TARANIS Q X7 2.4GHZ 16CH TRANSMITTER - <b>WHITE</b> - SNHE
    FRSKY 2.4GHZ ACCST TARANIS Q X7 2.4GHZ 16CH TRANSMITTER - WHITE
    Eachine <b>VR-007</b> Pro VR007 Pro 5.8G 40CH HD FPV Goggles 4.3 Inch Video Headset With 3.7V 1600mAh Battery - SNHE
    Eachine VR-007 Pro VR007 Pro 5.8G 40CH HD FPV Goggles 4.3 Inch Video Headset With 3.7V 1600mAh Battery
    Ultra Power UP-S6 1S AC/DC Battery Charger - SNHE
    Ultra Power UP-S6 1S AC/DC Battery Charger
    HMDVR-S DVR 1280*720 16:9 NTSC Video Audio Mini FPV Recorder for Micro FPV Multicopters - SNHE
    HMDVR-S DVR 1280*720 16:9 NTSC Video Audio Mini FPV Recorder for Micro FPV Multicopters
    Nitro Nectar 250mAh HV LiPo Battery - SNHE
    Nitro Nectar 250mAh HV LiPo Battery
    Ultra Power UP100AC Plus Battery Charger - SNHE
    Ultra Power UP100AC Plus Battery Charger
    1S 3.7V Lipo Battery Parallel Charging Board For IMAX B6 Charger - SNHE
    1S 3.7V Lipo Battery Parallel Charging Board For IMAX B6 Charger
    Charge Lead Adapter XT30 to 4mm Banana Plug - SNHE
    Charge Lead Adapter XT30 to 4mm Banana Plug
    FrSky Taranis Q X7S Radio w/ M7 Hall Sensor Gimbals - <b>Carbon</b> - SNHE
    FrSky Taranis Q X7S Radio w/ M7 Hall Sensor Gimbals - Carbon
    BetaFPV 40mm 4-blade 2S Whoop Propellers (1.5mm Shaft Hole) - SNHE
    BetaFPV 40mm 4-blade 2S Whoop Propellers (1.5mm Shaft Hole)
    Eachine EV800D 5.8G 40CH Diversity FPV Goggles 5 Inch 800*480 Video Headset HD DVR Built in Battery - SNHE
    Eachine EV800D 5.8G 40CH Diversity FPV Goggles 5 Inch 800*480 Video Headset HD DVR Built in Battery
    Tattu <b>FunFly 1300mAh</b> 100C 14.8V 4S1P lipo battery pack with XT60 Plug - SNHE
    Tattu FunFly 1300mAh 100C 14.8V 4S1P lipo battery pack with XT60 Plug

    - SNHE Product Reviews - SNHE
    There are currently no reviews for this product.

    - SNHE Shopping Cart more - SNHE- SNHE
    - SNHE
    0 items
    - SNHE





    - SNHE Quick Find - SNHE
    - SNHE
     
    Use keywords to find the product you are looking for.
    Advanced Search
    - SNHE



    - SNHE Notifications more - SNHE- SNHE
    - SNHE
    Notifications - SNHENotify me of updates to BetaFPV Beta75X 2S Whoop Quadcopter - BNF FRSKY
    - SNHE
    - SNHE Reviews more - SNHE- SNHE
    - SNHE
    Write Review - SNHEWrite a review on this product!
    - SNHE
    - SNHE Track Your Shipment - SNHE
    - SNHE


    - SNHE

    All items in stock unless stated otherwise.




    For security reason, your IP address have been recorded: 54.234.13.175

    CLASSIC - MOBILE View

    Copyright © 2018 SN Hobbies - RC Multirotors, Airplanes, Helicopters, Cars & Trucks, Boats, Quadcopters